Technical requirements for gas pipelines

During installation, the distance between the pipe and the anode and the distance between the anode and the anode should be greater than or equal to three meters, and the minimum should not be less than 0.3m.

For resistivity greater than 100 ω? M, a banded magnesium anode is recommended)

Precautions for use:

.

Large quantity of electricity generated per unit mass and high potential; It is an ideal sacrificial anode material.

. Suitable for cathodic protection of metal structures in soil, fresh water and seawater, such as oil and gas pipelines, storage tanks, hot water exchangers, condensers and so on.

Magnesium alloy sacrifice anodes are produced according to the national standard GB/T17731-2004 "Magnesium alloy Sacrifice Anodes", and the anodes used for pipelines are also in line with SY/T0019-97 "Design Code for Cathodic Protection of Sacrifice Anodes for Buried Steel Pipelines".

Product features:

The product has the following characteristics :(1) small specific gravity, negative potential, (2) high driving voltage to iron, low current efficiency, (3) especially suitable for high resistivity medium. Suitable for cathodic protection of metal structures in soil, fresh water and seawater, such as oil and gas pipelines, storage tanks, hot water exchangers, condensers and so on. After the anode is placed in the soil pit in dry areas, the packing material should be fully soaked with water before backfilling the soil, lest the anode cannot conduct electricity adequately.

Scope of application:

Collision with steel structure should be avoided. The magnesium alloy produced by our company is made of high quality raw materials. The anode potential is negative and the quantity of electricity generated per unit mass is large. It is an ideal sacrificial anode material.

? The product description

Implementation standard:

ASTM -G97

Sacrifice anode for magnesium alloy

SY/T0019-97 Specification for design of sacrificed-anode cathodic protection for buried steel pipes

Main performance:

When used in soil, the anode must be buried in a packing bag.

It is suitable for the anti-corrosion protection of oil, gas, water supply and drainage pipeline, underground cable, chemical industry, communication, harbor, ship, reservoir gate and other projects in fresh water.

When used in soil, it should be buried in a low, wet place.

The magnesium alloy produced by our company is made of high quality raw materials. The anode potential is negative and the quantity of electricity generated per unit mass is large. It is an ideal sacrificial anode material.