Bagged magnesium anode oil pipeline using cathodic protection sacrificial anode material manufacturers

Product introduction  

Magnesium alloy sacrifice anodes are produced according to the national standard GB/T17731-2004 "Magnesium alloy Sacrifice Anodes", and the anodes used for pipelines are also in line with SY/T0019-97 "Design Code for Cathodic Protection of Sacrifice Anodes for Buried Steel Pipelines".  

Our magnesium alloy sacrificial anodes are widely used in oil pipelines, natural gas, gas pipelines and storage tanks.  Ports, ships, submarine pipelines, drilling platforms;  Airport, parking lot, bridge, power plant, municipal construction, water treatment plant, petrochemical plant, smelter, gas station corrosion protection and water heater, heat exchanger, evaporator, boiler and other equipment.  

The product has the following characteristics:  

(1) Small specific gravity and negative potential.  

(2) The driving voltage for iron is high and the current efficiency is low.  

(3) Large generating capacity per unit mass and long service life.  

2. The chemical composition of magnesium alloy sacrificial anode  

Al Zn Mn Fe (Max) Cu (Max) Ni (Max) Si (Max) Ca (Max) Others (Max) Mg  

MGAZ63B 5.3 ~ 6.7 2.5 ~ 3.5 0.15 ~ 0.60 0.003 0.01 0.001 0.08 -- 0.30  

MGAZ31B 2.5 ~ 3.5 0.60 ~ 1.4 0.20 ~ 1.0 0.003 0.01 0.001 0.08 0.04 0.30  

MGM 1C ≤0.01 -- 0.50 ~ 1.3 0.01 0.01 0.001 0.05 -- 0.30 allowance  

3. The electrochemical performance of magnesium alloy anode is sacrificed  

License number open circuit potential (-v (CSE)) closed circuit potential (-v (CSE)) actual capacitance (A.h/kg) current efficiency %  

MGAZ63B 1.57 to 1.67 1.52 to 1.57 ≥1210 ≥55  

MGAZ31B 1.57 ~ 1.67 1.47 ~ 1.57 ≥1210 ≥55  

MGM1C 1.77 ~ 1.82 1.64 ~ 1.69 ≥1100 ≥50  

Note: Electrochemical performance in seawater is subject to negotiation between the supplier and the supplier  

4. Specifications and models  

Name Model Gauge /mm Weight /kg shape  

Magnesium alloy sacrificial anode MG-4 (75+85) ×80×350 4 trapezoidal  

Magnesium alloy sacrificial anode MG-8 (75+85) ×80×700 8 trapezoid  

Magnesium alloy sacrificial anode MG-11 (90+100) ×90×700 11 trapezoid  

Magnesium alloy sacrificial anode MG-14 (100+110) ×105×700 14 trapezoid  

Magnesium alloy sacrificial anode MG-22 (130×150) ×125×700 22 trapezoid  

Note: Other specifications and models can be manufactured according to customer requirements